Ethernet control module 8-channel relay Ethernet controller board with RJ45 interface

Know: the product has no technical support, and it is only for cross-border use 

Product selling points:
1. The product is widely used
2. Easy to use
3. There are many applicable scenarios
4. Using the controller module and 8-channel relay, up to 8 devices can be remotely controlled on the LAN.
5. Network control via RJ45 telecom connection

Product instructions:
1: Default IP: 192.168.1.4 Port: 30000
Open the browser, enter the address bar: http://192.168.1.4/30000 to enter the control interface

2. Board command:
http://192.168.1.4/30000/00: relay-01 off
http://192.168.1.4/30000/01: relay-01 on
http://192.168.1.4/30000/02: relay -02 off
http://192.168.1.4/30000/03: relay-02 on
http://192.168.1.4/30000/04 : relay-03 off
http://192.168.1.4/30000/05: relay-03 Open 

...
http://192.168.1.4/30000/14: Relay-8 off
http://192.168.1.4/30000/15: Relay-8 on
http://192.168.1.4/30000/41: Enter
http: //192.168.1.4/30000/40: exit
http://192.168.1.4/30000/42: next page
http://192.168.1.4/30000/43: next page