PS2 handle wireless remote control robot smart car rocker adapter board compatible with Arduino kit DIY

Features

• Control 4-way DC motors
• Control 16-way steering gear
• It can be matched with the Bluetooth HC-06 and the WiFi module DT-06 . The difference between the two is that the WiFi control distance is longer (the hotspot name is Doit-####), which can reach about 50-100 meters; The distance of 05 is about 10 meters;
• It can be used with the handle , and the remote control distance is about 10 meters.
• Arduino IDE software download address: https://pan.baidu.com/s/1CUYWY-CRkGBeBXGKexzA2w, extraction code: 7yap
• Program source code, please click the following link to download the mobile app .

Please read the following information carefully **( very important !!)** before use:

• Make sure that the power supply at the receiver end is sufficient, otherwise all the lights will be off, or only the power light will be on, and the signal light will not be on.
• Power supply mode of the handle: 2 AA batteries (not delivered).
• The handle receiver has a total of 2 indicators. After the power is turned on, the power indicator is always on; the signal indicator keeps flashing until the pairing is successful, and it will not flash after the pairing is successful;
• Handle: In the unpaired state, the power saving mode will be activated after 30s; in the open and paired state, if no button is pressed for 5 minutes, the power saving mode will be activated. At this point just press the START button to activate. If the indicator lights of the controller and receiver keep flashing again, please press ANALOG to pair. After the pairing is successful, the indicator light does not flash, and it can be controlled.
• The communication mode is 2.4G, and the communication distance is about 10 meters.
• The program source code for controlling 4 DC motors + 16 servos (including WiFi, Bluetooth and handle versions), please click this link to download the mobile app . Only match our motor driver board .
• After downloading the program, the direction key on the left side of the handle can control the direction of the car; press the L1 and R1 keys on the handle to control the steering of the servo, and press the green triangle key on the right side of the handle to indicate the servo number +1. For example, the default is to control the first servo when power on, then press the green triangle key, the servo number + 1, that is, the control is the No. 2 key, and so on; press the cross (❌) key on the right side of the handle, the servo Number -1, that is, if the current control servo is the No. 5 servo, press the cross (❌) key, then the control is the No. 4 servo.
• If the servo is a 360° servo, it will rotate continuously after power on, and it can be controlled to stop by pressing L1 and R1 in the reverse direction.

Detailed documentation and source code address:

https://gitnova-cn.gitee.io/zhdocs/#/zhControlPanel/4&&16ControlKit/4&&16ControlKit